K Hardware Elizabeth - SET-3G High-Strength Epoxy Tie Adhesive w/ Nozzle and Extension, 8.5 oz.

K Hardware Elizabeth
175 W Kiowa Ave
Elizabeth, CO 80107

Home: Adhesives: Adhesives & Glue: Epoxy & Glue

SET-3G High-Strength Epoxy Tie Adhesive w/ Nozzle and Extension, 8.5 oz.
SIMPSON STRONG TIE
$28.99 ea.

Model# SET3G10

SKU 173600

UPC 707392587262

Warehouse Quantity 249
Has Notes
Note Instructions
SET-3G, 8.5OZ Epoxy Tie is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40°F (4°C) to 100°F (38°C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.

SET-3G™ is an epoxy-based anchoring adhesive with high design strength and proven performance. the adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). this low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40°f (4°c) to 100°f (38°c). set-3g installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.
- Exceptional performance superior bond strengths permit ductile solutions in high seismic areas
- Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
- Design flexibility improved sustained load performance at elevated temperature
- Jobsite versatility can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C)
- Manufactured in the USA using global materials
- 22-oz. side-by-side cartridge
- Tested in accordance with ICC-ES AC308 (ESR-4057), ACI 355.4 and applicable ASTM test methods
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning; see Code Report (ESR-4057) for approved systems
Country US

Length 3.00

Width 3.00

Height 10.00

Pack Length 9.50

Pack Width 8.13

Pack Height 12.00

Hazmat True

Shippable Ground

SET-3G High-Strength Epoxy Tie Adhesive w/ Nozzle and Extension, 8.5 oz.

Related Items